Rockford Fosgate P2D4-10 Punch P2 DVC 4 Ohm 10-Inch 300 Watts RMS 600 Watts Peak Subwoofer

Rockford Fosgate P2D4-10 Punch P2 DVC 4 Ohm 10-Inch 300 Watts RMS 600 Watts Peak Subwoofer Review

Rockford Fosgate P2D4-10 Punch P2 DVC 4 Ohm 10-Inch 300 Watts RMS 600 Watts Peak Subwoofer Feature

• 10-inch, dual 4-ohm subwoofer with 600 watts maximum power handling (300 watts RMS)
• Kevlar fiber reinforced paper cone with high-density poly-foam surround
• High-temp voice coils with spun-laced Nomex re-inforcement collar
• Flex fit basket for slight adjustments when mounted
• One-year limited manufacturer's warranty
• Features 2.25 Inch Copper Clad Aluminum Voice Coil
• VAST Vertical Attached Surround For Increased Cone Area
• Features Flex Fit Basket Design
• Kevlar Fiber Reinforced Paper Cone
• 300 Watts RMS 600 Watts Peak Power Rating

Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 10-inch subwoofer is no exception. Kevlar fiber reinforced paper cones kick out bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring, and an optional grille insert is also available.

Rockford Fosgate Punch Series Subs Featuring innovative parabolic cone designs, oversized surrounds and large motor assemblies, Punch subwoofers deliver deep, loud, aggressive bass--not to mention stunning cosmetics that you'll want to show off. For over 20 years, Punch subwoofers have shown the world that big bass, extended power handling and awesome cosmetics need not cost a fortune. One listen and you'll know why it's called The PUNCH.

P2D4-10 Features

Punch subwoofers deliver deep, loud, aggressive bass and feature flex fit baskets for easy adjustments when mounted. Click here for a larger image

Anodized aluminum voice coil formers provide excellent heat dissipation. Click here for a larger image

Speaker Construction

• Custom 10-AWG nickel plated push terminals
• Diamond cut cast aluminum trim ring with optional grille
• Dual linear spider with embedded 16 AWG tinsel leads
• Extended pole piece and bumped vented backplate
• High-temp voice coil with spun-laced Nomex re-inforcement collar
• Kevlar fiber reinforced paper cone
• Protective PVC textured magnet cover
• StampCast basket with integrated spider venting

Anodized Aluminum Voice Coil Former

Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Flex Fit Basket

The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

Stitched Tinsel Leads

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

"VAST" Surround

The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.

About Rockford Fosgate

Setting the standard for excellence in the audio industry, the Rockford Corporation markets and distributes high-performance audio systems for the mobile audio aftermarket and OEM market. Headquartered in Tempe, Ariz., Rockford Corporation is a publicly traded company and manufactures its products under four brands: Rockford Fosgate, Rockford Acoustic Design, Lightning Audio and InstallEdge.com.

P2D4-10 Specifications

Size:	10 Inches
Impedance:	Dual 4-Ohm
Power Handling:	300 Watts RMS 600 Watts Max
Voice Coil Diameter:	2.25 Inches
Magnet Weight:	62 oz.
Speaker Connector:	Dual 10 AWG compression
SPL(1w/1m):	84 dB
Woofer Displacement:	0.052" cu. ft. (1.47 Liters)
Cutout Diameter:	9.125 inches
Mounting Depth:	5.92 inches

What's in the Box

Rockford Fosgate Punch P2 P2D4-10 10-Inch DVC Subwoofer (Dual 4 Ohm), Painted Aluminum Trim Ring, Installation Hardware, User's Manual

Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.