Rockford Fosgate Punch 1000-Watt Mono Amplifier

Rockford Fosgate Punch 1000-Watt Mono Amplifier Review

Rockford Fosgate Punch 1000-Watt Mono Amplifier Feature

• Mono amplifier delivers 250W x 1 @ 4-Ohms RMS, 500W x 1 @ 2-Ohms RMS, 1000W x 1 @ 1-Ohm RMS
• Variable low-pass crossover (35-250Hz 24dB/octave Butterworth)
• Punch EQ2 variable bass boost (0dB to +18dB @ 45Hz)
• Class-bd amplifier with MOSFET output stage and power supply
• Audiophile grade speaker connections and RCA pass-thru

With its super efficient Class-BD circuit topology, the P1000-1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.

Rockford Fosgate Punch Series Amplification For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today. It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce sonic perfection along with impressive power in a compact chassis.

---

Optimized for mid-bass speakers or subwoofers. Click to enlarge.

All connections are recessed into the amplifier's chassis and located on the bottom edge of the P1000-1bd, for a clean, uncluttered install that looks great in any car. Click to enlarge.

P1000-1bd Features

• 12dB/octave crossover
• 4 Gauge power/ground terminals
• Audiophile grade speaker connections
• Infrasonic filter
• MOSFET output stage
• MOSFET power supply
• RCA pass-thru
• Top Mounted LED Indicators

CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Class bd
Rockford Fosgate bd topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs. POWER bd amplifiers are 75-80% efficient vs. 20-60% efficient class ab amplifiers. What does that mean? More power from your amplifier with less drain on your vehicles electrical and charging system.

Differential Inputs
Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.

DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Dynamic Thermal Management
Heat is often inefficiently dissipated across a heatsink causing "hot spots". Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.

MEHSA³
MEHSA³ (Maximum Efficiency Heat Sink Application--gen. 3) reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

NOMAD
NOMAD (Non Multiplying Advanced Decision) is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

Punch EQ2
In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars: a midbass hump between 100-275Hz, a steep roll-off of high frequencies from 2kHz up to 20kHz, and reduced bass response below 50Hz.

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

Rockford Fosgate Avatar
These Avatars are a personal signature from the Rockford Fosgate team member who designed and engineered this fanatic product. This statement illustrates Rockford's commitment to being Designed and Engineered in the U.S.A.

TO-247 MOSFETs
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.

---

P1000-1bd Specifications

Number of Channels:	1
Rated Power:	250W x 1 @ 4-Ohms RMS 500W x 1 @ 2-Ohms RMS 1000W x 1 @ 1-Ohm RMS
Total Power:	1000 Watts
Dynamic Power:	--
Bridgeable:	No
Efficiency (average):	86% @ 4-Ohm 84% @ 2-Ohm 76% @ 1-Ohm
Crossover Controls:	Low-Pass (LP): 35-250Hz 24dB/octave Butterworth
Tone Controls:	Punch EQ2 Bass: 0dB to +18dB @ 45Hz Infrasonic Filter: Selectable 12dB/Octave, -3dB @ 28Hz
Signal Input:	Low level: 1 RCA pair
Signal Output:	Low level: 1 RCA pair
Power Input Connector:	Block
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG to 18 AWG
Heat Sink Type:	Cast aluminum
Cooling:	Convection
Remote Controls:	Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
Visual Indicators:	Power Thermal Protect
Circuit Topology Class:	Class bd
Frequency Response:	20Hz to 250kHz +/- 0.5dB
Shipping Weight:	10.38 Lbs. (4.70 Kg.)
Dimensions (HxWxL):	2.25 x 7.625 x 14.375 (in) 5.71 x 19.37 x 36.50 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifier, User's Manual

---

More Amplifier Options From Rockford Fosgate

If you need more features, step up to the Power Series T1000-1BDCP.

On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R1000-1D.

---

Rockford Fosgate Punch Series Power Amplifiers

Rockford Fosgate Punch P200-2 200-Watt Stereo Amplifier	Rockford Fosgate Punch P300-1 300-Watt Mono Amplifer	Rockford Fosgate Punch P300-2 300-Watt Stereo Amplifer	Rockford Fosgate Punch P400-1 400 Watt Mono Amplifier
Rockford Fosgate Punch P400-2 400-Watt Stereo Amplifier	Rockford Fosgate Punch P400-4 400-Watt Multi Channel Amplifer	Rockford Fosgate Punch P500-1BD 500-Watt Mono Amplifer	Rockford Fosgate Punch P500-2 500-Watt Stereo Amplifer
Rockford Fosgate Punch P500-4 500 Watt Multi Channel Amplifier	Rockford Fosgate Punch P700-1BD 700 Watt Mono Amplifier	Rockford Fosgate Punch P1000-1BD 1000-Watt Mono Amplifer

Rockford Fosgate 1000 Watt Mono amplifer with on-board adjustable crossover, gain control, and Patented Punch EQ. Amplifier features DTM Thermal management circuitry and MOSFET technology for clean performance that does not shut down. CEA Certified RMS Power Rating 250 watts x1 @ 4 Ohms, 500 watts x1 @ 2 Ohms, 1000 watts x1 @ 1 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Rockford Fosgate Prime R1693 6-Inch x 9-Inch Full-Range 3-Way Speakers (Pair)

Rockford Fosgate Prime R1693 6-Inch x 9-Inch Full-Range 3-Way Speakers (Pair) Review

Rockford Fosgate Prime R1693 6-Inch x 9-Inch Full-Range 3-Way Speakers (Pair) Feature

• 6-by-9-inch three-way speaker with 120 watts maximum power handling (60 watts RMS)
• Mica-injected polypropylene cone with foam surround
• 1/2-inch mylar balanced dome tweeter and 1.75-inch mylar midrange
• Built-in tweeter high-pass filter
• 48Hz - 22kHz frequency response with 89dB sensitivity

These 6-by-9-inch Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature Mica injected polypropylene cones and a mylar balanced dome tweeter. Includes grilles so they look as good as they sound.

The Rockford Fosgate Prime Series A new generation of performance geared toward the "novice" car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.

---

R1693 Features Mica Injected Polypropylene Cone With Rubber Surround Adds strength and rigidity Provides resiliency against high power output Full bodied sound 18 AWG Stamped Steel Frame Textured abrasion resistant powder coated finish Direct OEM mounting applications Shallow mounting depth 1/2-Inch Mylar Balanced Dome Tweeter Lightweight mylar combines high sensitivity and smooth extended frequency response Ensures low distortion Provides an open sound stage

Factory replacement speaker delivering authentic Rockford Fosgate sound. Click to enlarge.

---

R1693 Specifications

Configuration:	3-Way Full-Range
Midrange Diameter:	6"x9"
Midrange Depth:	2.85" (72.40cm)
Tweeter Diameter:	0.5"
Tweeter Depth:	n/a
Frequency Response:	48Hz - 22kHz
Power Handling:	60 Watts RMS 120 Watts Max
Crossover:	Tweeter High-Pass (HP): 6dB
Sensitivity:	89dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1693 6x9-Inch Full Range 3 Way Speakers, Trim Rings, Mounting Hardware, User's Manual

---

Want a Little Extra?

For those willing to invest a bit more, Rockford also offers the Punch Series P1664C and Power Series T1693 6-by-9-inch full-range speakers.

---

Prime Series Full-Range Speakers

Rockford Fosgate Prime R152 5.25-Inch Full Range Coaxial Speakers	Rockford Fosgate Prime R1682 6x8-Inch Full Range coaxial Speakers	Rockford Fosgate Prime R1653 6.5-Inch Full Range 3 Way Speakers	Rockford Fosgate Prime R1693 6x9-Inch Full Range 3 Way Speakers

Rockford Fosgate Prime 6x9-Inch Full range 3 way speakers. Speakers feature Mica Injected polypropolene cone and .5-Inch Mylar balanced dome tweeter. CEA Certified 60 Watts RMS, 120 Watts peak power rating. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers Review

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers Feature

• 6.5-inch, two-way component system with 200 watts maximum power handling (100 watts RMS)
• Woofer features carbon fiber & polypropylene injection molded cone with butyl rubber surround
• Treated fabric dome neo-tweeter with integral suspension
• Audiophile-grade crossover with 18dB/octave high-pass and 12dB/octave low-pass at 3.5kHz
• 55Hz - 22kHz frequency response with 89dB sensitivity

Get the best out of your system with a Power series component system. Utilizing a separate audiophile grade tweeter, separate midrange and dedicated 2-way crossover, each part of the system will accurately reproduce music with transparent detail. The T1652-S is a 6.5-inch, two-way component system that handles 200 Watts.

The Rockford Fosgate Power Series Designed to play loud, play hard and sound great, Rockford Fosgate's Power component systems and coaxials combine premium materials with innovative engineering to create high performance speakers for those who live on the edge. When too much is just right!

---

T1652-S Features Speaker Construction 3 levels of tweeter attenuation 5% tolerance high quality poly-capacitors and air-core inductors Butyl rubber surround External audiophile grade component crossover On-axis/off-axis tweeter configuration Recessed tweeter mount uses standard 1-3/4" hole saw Treated fabric dome neo-tweeter with integral suspension DDC Tweeter Mounting Rockford's DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximimum ease of installation. Flex Fit Basket The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted. Multi-OEM Adapter The Multi-OEM Adapter plate allows round component or full-range speakers to fit in certain OEM openings. This allows the speaker the capacity to fit more vehicles VAST Surround The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.

Get the best out of your system with a Power series component system. Click to enlarge.

External audiophile-grade crossover.

---

T1652-S Specifications

Configuration:	2-Way Component System
Midrange Diameter:	6.5" (165mm)
Midrange Depth:	2.51" (64mm)
Tweeter Diameter:	1.0" (25mm)
Tweeter Depth:	0.50" (13mm)
Frequency Response:	55Hz - 22kHz
Power Handling:	100 Watts RMS 200 Watts Max
Crossover:	High-Pass (HP): 3.0kHz @ 18dB/octave Butterworth Low-Pass (LP): 3.0kHz @ 12dB/octave Butterworth
Sensitivity:	89dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes
Shipping Weight:	9.4 Lbs.(4.26 Kg.)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers (Two Woofers, Two Tweeters, Crossover), Grilles, Grilles/Trim Rings, Tweeter Trim Rings (One Set Brushed Aluminum/One Set Polished Aluminum), Mounting Hardware for Surface/Angle/Flush Mounts, Adapter Plates, User's Manual

---

On a Tighter Budget?

For those seeking a more affordable 6.5-inch component solution, Rockford offers the Punch P1652-S Component Speakers and the R1652-S 6.5-Inch Component Speaker System.

---

Power Series Component Systems

Whatever your application, chances are Rockford has you covered.

Rockford Fosgate Power T152-S 5.25" Power T1 Component Speakers	Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers	Rockford Fosgate Power T1T-S Tweeter Set

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers

Rockford Fosgate BLD Balanced Line Driver

Rockford Fosgate BLD Balanced Line Driver Review

Rockford Fosgate BLD Balanced Line Driver Feature

• Accepts high and low level inputs
• Up to 20v ouptput unbalanced
• Small footprint fo small spaces
• Low profile design for ease of installation
• Includes mountng hardwa

Rockford Fosgate Balanced Line Driver, Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

New Rockford Fosgate R2 Ultra Shallow 10-Inch 2 Ohm DVC Subwoofer

New Rockford Fosgate R2 Ultra Shallow 10-Inch 2 Ohm DVC Subwoofer Review

New Rockford Fosgate R2 Ultra Shallow 10-Inch 2 Ohm DVC Subwoofer Feature

• Stamp-cast basket with integrated spider venting
• Mica injected polypropylene cone
• Mounting Depth 3.4"
• 400w Power Handling
• Linear spider with stitched 16 AWG tinsel leads

New Rockford Fosgate R2 Ultra Shallow 10" DVC Subwoofer

Rockford Fosgate P2D4-12 Punch P2 DVC 4 Ohm 12-Inch 400 Watts RMS 800 Watts Peak Subwoofer

Rockford Fosgate P2D4-12 Punch P2 DVC 4 Ohm 12-Inch 400 Watts RMS 800 Watts Peak Subwoofer Review

Rockford Fosgate P2D4-12 Punch P2 DVC 4 Ohm 12-Inch 400 Watts RMS 800 Watts Peak Subwoofer Feature

• 12-inch, dual 4-ohm subwoofer with 800 watts maximum power handling (400 watts RMS)
• Kevlar fiber reinforced paper cone with high-density poly-foam surround
• High-temp voice coils with spun-laced Nomex re-inforcement collar
• Flex fit basket for slight adjustments when mounted
• One-year limited manufacturer's warranty
• Features 2.25 Inch Copper Clad Aluminum Voice Coil
• VAST Vertical Attached Surround For Increased Cone Area
• Features Flex Fit Basket Design
• Kevlar Fiber Reinforced Paper Cone
• 400 Watts RMS 800 Watts Peak Power Rating

Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 12-inch subwoofer is no exception. Kevlar fiber reinforced paper cones kick out bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring, and an optional grille insert is also available.

Rockford Fosgate Punch Series Subs Featuring innovative parabolic cone designs, oversized surrounds and large motor assemblies, Punch subwoofers deliver deep, loud, aggressive bass--not to mention stunning cosmetics that you'll want to show off. For over 20 years, Punch subwoofers have shown the world that big bass, extended power handling and awesome cosmetics need not cost a fortune. One listen and you'll know why it's called The PUNCH.

P2D4-12 Features

Punch subwoofers deliver deep, loud, aggressive bass and feature flex fit baskets for easy adjustments when mounted. Click here for a larger image

Anodized aluminum voice coil formers provide excellent heat dissipation. Click here for a larger image

Speaker Construction

• Custom 10-AWG nickel plated push terminals
• Diamond cut cast aluminum trim ring with optional grille
• Dual linear spider with embedded 16 AWG tinsel leads
• Extended pole piece and bumped vented backplate
• High-temp voice coil with spun-laced Nomex re-inforcement collar
• Kevlar fiber reinforced paper cone
• Protective PVC textured magnet cover
• StampCast basket with integrated spider venting

Anodized Aluminum Voice Coil Former

Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Flex Fit Basket

The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

Stitched Tinsel Leads

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

"VAST" Surround

The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.

About Rockford Fosgate

Setting the standard for excellence in the audio industry, the Rockford Corporation markets and distributes high-performance audio systems for the mobile audio aftermarket and OEM market. Headquartered in Tempe, Ariz., Rockford Corporation is a publicly traded company and manufactures its products under four brands: Rockford Fosgate, Rockford Acoustic Design, Lightning Audio and InstallEdge.com.

P2D4-12 Specifications

Size:	12 Inches
Impedance:	Dual 4-Ohm
Power Handling:	400 Watts RMS 800 Watts Max
Voice Coil Diameter:	2.25 Inches
Magnet Weight:	72.8 oz.
Speaker Connector:	Dual 10 AWG compression
SPL(1w/1m):	86 dB
Woofer Displacement:	0.170" cu. ft. (4.8 Liters)
Cutout Diameter:	11.25 inches
Mounting Depth:	6.40 inches

What's in the Box

Rockford Fosgate Punch P2 P2D4-12 12-Inch DVC Subwoofer (Dual 4 Ohm), Painted Aluminum Trim Ring, Installation Hardware, User's Manual

Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.

Rockford Fosgate Prime R1S412 R1 12-Inch 150 Watt Subwoofer - 4 Ohm

Rockford Fosgate Prime R1S412 R1 12-Inch 150 Watt Subwoofer - 4 Ohm Review

Rockford Fosgate Prime R1S412 R1 12-Inch 150 Watt Subwoofer - 4 Ohm Feature

• 12-inch subwoofer with 300 watts maximum power handling
• Parabolic polypropylene cone
• Anodized aluminum voice coil former
• Stamped steel basket
• Optimized for sealed enclosures

The Prime 12" woofers offer Rockford Fosgate performance at an unbelievable value. These models feature solid stamped steel frame, quick-release compression terminals, and a Parabolic polypropylene cone. Best of all, they work great in sealed enclosures.

Rockford Fosgate Prime Series Subwoofers Rockford Fosgate pulled DNA from its big brothers to create the Prime series woofers. Parabolic cone designs result in solid bass reproduction and aluminum voice coils keep woofers running cool, even under demanding conditions. Straight forward mechanical designs mean you'll have solid performance for years to come. Add Prime woofers to any system and you'll "feel" the music you've been missing.

---

R1S412 Features Speaker Construction 12 AWG compression terminals Parabolic polypropylene cone Single voice coil design Stamped steel basket 18 gauge stamped steel frame. Optimized for sealed enclosures Aluminum V/C Former Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide excellent heat dissipation. Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions. CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Rockford Fosgate performance at an unbelievable value. Click to enlarge.

---

R1S412 Specifications

Size:	12"
Impedance:	4-Ohm
Power Handling:	150 Watts RMS 300 Watts Max
Voice Coil Diameter:	2.0" (4-Layer) (3.8cm)
Motor Size:	52.47 oz. (1.49 Kg.)
Speaker Connector:	12 AWG compression
SPL(1w/1m):	87 dB
Woofer Displacement:	0.101 cu. ft. (2.86 Liters)
Cutout Diameter:	10.94 in. (27.80 cm)
Mounting Depth:	5.00 in. (12.70 cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1S412 R1 12-Inch 150 Watt Subwoofer, User's Manual

---

Need a Little More?

Step up to the Punch Series P1S412 for a superior sub to fit the same applications.

---

Prime Series Subwoofers

Rockford Fosgate Prime R1S410 R1 10-Inch 150 Watt Subwoofer	Rockford Fosgate Prime R1S412 R1 12-Inch 150 Watt Subwoofer

Rockford Fosgate Prime 4 Ohm SVC 12-Inch Subwoofer CEA Certified Power 150 Watts RMS, 300 Watts Peak. Optimized for sealed enclosures Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.