Rockford Fosgate T0D412 Power T0 DVC 4 Ohm 12-Inch 550 Watts RMS 1100 Watts Peak Subwoofer

Rockford Fosgate T0D412 Power T0 DVC 4 Ohm 12-Inch 550 Watts RMS 1100 Watts Peak Subwoofer Review

Rockford Fosgate T0D412 Power T0 DVC 4 Ohm 12-Inch 550 Watts RMS 1100 Watts Peak Subwoofer Feature

• 12-inch, dual 4-ohm subwoofer with 1400 watts maximum power handling (700 watts RMS)
• Kevlar fiber reinforced paper cone with anodized aluminum dust cap and voice coil former
• High-temp voice coil with spun-laced Nomex re-inforcement collar
• Optimized and matched magnetic and complicance geometry; optimized pole piece and spider venting
• One-year limited manufacturer's warranty
• Features 3 Inch Copper Clad Aluminum Voice Coil
• Die Cast Aluminum Frame
• SWIFT Selectable Woofer Impedance Fused Terminal
• VAST Vertical Attached Surround For Increased Cone Area
• 700 Watts RMS 1400 Watts Peak Power Rating

The T0D412 12-inch 4-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25%, so they perform like much larger woofers. The FlexFit basket provides extreme flexibility for extreme installations. Clean, high-tech, and high-power handling characteristics let this subwoofer wear the torture-tested "Power Series" badge proudly.

Rockford Fosgate Power Series Subs These subs are big in every way. Rockford's engineers started with cast aluminum baskets and loaded in powerful linear motors. Add to that dual spiders, aluminum cones, and high-excursion rubber surrounds, and you get a sub that is both physically impressive and sonically overwhelming. Power series subwoofers deliver pounding bass, extreme low frequency extension, and serious power handling capacity.

Serious performance, high power handling, and flexible installation. Click here for a larger image

T0D412 Features

Speaker Construction

• Anodized aluminum heat sinking dust cap
• Anodized aluminum voice coil former
• High-temp voice coil with spun-laced Nomex re-inforcement collar
• Kevlar fiber reinforced paper cone
• Optimized and matched magnetic and complicance geometry
• Optimized pole piece and spider venting
• Periodic-stitched fatigue resistant tinsel lead wire
• Proprietary 8 AWG insulated allmetal input spring terminal connection
• Rigid die-cast aluminum basket

Anodized Aluminum Voice Coil Former

Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.

CEA-2031

Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.

Flex Fit Basket

The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.

Protective metal grille included.

Stitched Tinsel Leads

Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer.

These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.

SWIFT Terminals

Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable impedance selection jumper also provides fused protection in severe overload conditions.

"VAST" Surround

The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.

About Rockford Fosgate

Setting the standard for excellence in the audio industry, the Rockford Corporation markets and distributes high-performance audio systems for the mobile audio aftermarket and OEM market. Headquartered in Tempe, Ariz., Rockford Corporation is a publicly traded company and manufactures its products under four brands: Rockford Fosgate, Rockford Acoustic Design, Lightning Audio and InstallEdge.com.

T0D412 Specifications

Size:	12 Inches
Impedance:	Dual 4-Ohm
Power Handling:	700 Watts RMS 1400 Watts Max
Voice Coil Diameter:	3 Inches
Speaker Connector:	Compression Terminal
SPL(1w/1m):	84.3 dB
Woofer Displacement:	0.308" cu. ft. (8.73 Liters)
Cutout Diameter:	11.25 inches
Mounting Depth:	6.875 inches

What's in the Box

Rockford Fosgate Power T0D412 12-Inch DVC Subwoofer (Dual 4 Ohm), Grille, Trim Ring, Installation Hardware, Installation and Operation Manual

Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.